|
|
|
|
|
|
|
|
|
For member pricing
|
| Toggle for 5/8 inch Clevis Pin, pin to pin 83.5mm, Body diameter 34.93mm, Overall Length 126mm, Grade 5 (Ti-6Al-4V) Titanium with Polished Finish |
 |
| |
A staple on any sailboat, the toggle can be found in a myriad of locations. Often times they are found connected by a clevis pin to the vessel's chain plates, in effect helping to keep the mast upright. A small yet significant component in the rigging, the jaw toggle has the capacity to cause big problems. Degradation and failure due to the ever present effects of crevice corrosion in stainless steel can have catastrophic results, causing untold amounts of damage to the boat as well as endangering the safety of it's passengers and crew.
However, said danger and catastrophe can easily be avoided by simply using a suitable material able to withstand the effects of crevice corrosion and extreme forces put upon it by wind and sea. Grade 5 (6Al-4V) titanium jaw toggles are approximately 3 and a half times stronger than stainless steel ones of the same size.
Titanium is also impervious to crevice corrosion in the natural environment. It will never rust or suffer from the destructive effects of crevice corrosion, which deteriorates a material from the inside out. A stainless steel toggle suffering crevice corrosion will look shiny and new on the outside, while looking like dirt on the inside.
TRUE TITANIUM is a trademark to establish that this product is manufactured from solid Titanium, rather than a coating, plating or color. TRUE TITANIUM, Tough-Ti, the AT Logo, the Ring around our high strength screws, LOOK FOR THE RING, AFFORDABLE TITANIUM NOW and ALLIED TITANIUM are all trademarks of Allied Titanium, Inc. |
|
|
| $219.69 |
| Each |
| 4 |
| 50 |
| 175.76 |
| 100 |
| 146.46 |
| |
Please call (800) 725-8143 or (302) 249-3295 if you need help. |
|
| 0.0000 |
| Metric |
| 16 |
| 40 |
| 126 |
| Marine |
| Rigging Parts |
| Toggle |
| +/- 0.50 mm |
| Ti5RGTLM16X34.93X126P |
| Toggle, Eye Jaw |
|
|
|
